Sheet Materials

Material Specification
Physical Properties
Typical Value
ASTM Method
IZOD Impact Strength
_
_
Notched at 73°f
1.2ft lbs/in
D-256

Notched at 32°f
.7ft lbs/in
D-256
Tensile Strength
_
_
To Break
5400 psi
D-638
Elongation Before Break
35%
D-638
Flexural Strength

_
_
Loan to Stretch Outer Surface 5%
7000 psi
D-790
Specific Gravity
1.15
D-792
Rockwell Hardness
R99, L77
D-785
Deflection Temperature
_
_
Temperature at Which Material Deflects
.254mm at 264 psi
170°f
D-648
Coefficient of Thermal Expansion
_
_
Inch/Inch/°f
3.8 x 10-5
D-696

LaserMark softens at about 200°f sufficiently so that it can be bent as needed. it can be sawed, drilled and bonded, but not sheared.

The base material was tested for flammability by Underwriters Laboratories. The material is rated 94HB on the UL94 test.

Note: The above information is given in good faith, but no warranty, express or implied, is given.

Back to LaserMark
flash photo gallery templates

© Copyright 2006 Identify Engraving Systems ltd, All Rights Reserved.
Product details and pricing are subject to change without notice. For current information please contact the company.
Acknowledgment is given to our suppliers for some of the content contained in this website. site map