|
Max Engraving Area |
32" x 20" (812 x 508 mm) |
|
Max Material Thickness |
9" (228 mm) |
|
Table Size |
37" x 21" (940 x 533 mm) |
|
Laser Control Display Panel |
4" x 3" LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features. |
|
Intelligent Memory Buffer |
Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved. |
|
Operating Modes |
Optimized raster engraving, vector cutting or combined raster/vector mode. |
|
Motion Control System |
High-speed, continuous-loop, DC servo motors using linear encoding technology for precise positioning. |
|
Laser Source |
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. |
|
X-Axis Bearings |
Ground and polished stainless steel NeverWear™ Bearing system. |
|
Belts |
Advanced B-Style doublewide Kevlar precision drive belts. |
|
Resolution |
User controlled from 150 to 1200 dpi. |
|
Speed and Power Controls |
Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB color. |
|
Print Interface |
10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000. |
|
Size and Weight |
42" wide x 32.5" deep x 42" high (1067 x 826 x 1067 mm) 375 lbs (172 kg) - 120 watt cabinet is 34.5" deep (876 mm) |
|
Standard Features |
Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2" focus lens, relocatable home, flash upgrade electronics. |
|
Electrical Requirements |
Auto-switching power supply accommodates 110 to 240 volt, 50 or 60 Hz, single phase, 15 amp AC. |
|
Ventilation System |
External exhaust to the outside required. Output diameter at machine is 6". |
| |
Safety |
CDRH Class IIIa |
