DDA Material softens at about 200°f sufficiently so that it can be bent as needed. it can be sawed, drilled and bonded, sheared and nailed to itself or other materials. Most of the colours will exhibit slight fading under prolonged exposure to direct sunlight. There are however those which tend to fade more severly. This material is designed for use where no direct extreme exposure is encountered. (For exterior DDA Material see our Ultra-Matte Product).

The Material was tested for flammability by Underwriters Laboratories. It is rated at 94HB on the UL94 test.

Note: The above information is given in good faith, but no warranty, express or implied, is given.

1.6ft lbs/in

D-256

D-256

Unnotched at 73°f

5400 psi

D-638

D-638

D-638

35%

D-638

11000 psi

D-790

Rockwell Hardness

R114, M45

D-785

Temperature at which Material Deflects .254mm at 264 psi

186°f

D-648